Trucks-SUVS / Without An Excellent Finish Your Vehicle Is No Shark

If there is a paradox that meanders through automobile vehicle owners – whether it is owners of cars, trucks or S.U.V.’s is that most owners and purchasers tend to short change their vehicle’s finish and final shiny finish and presentation. This absurdity is usually two fold: either the enthusiast loses patience, is lazy or simply runs out of money. However according to automotive industry expert Riteway Strokon “Presentation and Appearance is Everything” “ Presentation, Presentation , Presentation“ is similar to the Real Estate Salesperson’s adage of “Location , Location , Location”.. What factors need to be considered in the choice of car body paint shop and technician specialists who will prepare and apply the finish to your vehicle – be it car, truck or S.U.V.? First of all a proper and a through job of preparation are essential. Once cannot skimp on a foundation of a house and once cannot skimp on proper auto body paint preparation. A paint job is only as good as to what is underneath it. The auto body surface must be absolutely clean – first by a chemical stripper, next removing any rust apparent or not apparent on the car by either by chemical means or by sandblasting. Once those two are done the surface must be washed down with a metal conditioner to in effect etch the metal surface for better adhesion of the paint. Next the surface of the vehicle is primed with a special “primer “coat of paint. The key thing to ask and look for at this stage of the process is whether the car with its coat of primer paint will be allowed to air dry and set for a number of days or whether the paint will be slapped on after only a cursory overnight time period of primer paint drying. After a thorough drying – this coat of primer paint will next be thoroughly and carefully sanded. Again attention to detail and patience are key. You can often judge these two traits in a shop and its staff by both their attention to cleanliness and order in their shop of tools and equipment, their general demeanor as well as references from previous customers. Next in line is the actual painting process. Here again attention to detail is key. Not enough can be stressed on the importance of this stage in the vehicle painting process. Lastly it comes to the post presentation finishing. Ask about this step. Some shops will consider the job “done” after the simple application of the surface paint. Others will pay great attention to detail – inspecting and applying finishing touches- in effect making sure that everything and anything of the presentation and appearance of the car is in order. The vehicle so to speak should be in better than “new condition”. Ensure that body moldings as well as the rubber door seals are placed in properly – that is tight fitting without space so that the rubber doors seals seal fit intact and tightly without gaps. There should be no wind noises. Lastly ensure that no remnants of the finished paint job are apparent in small ways on your vehicle paint job. All in all a more than excellent paint job more than adds great value and appreciation to your vehicle – whether it is Car, Truck or Sports Recreation Vehicle .

• CAR NEWS
• Car Reviews
Car News Car Videos and News
Car review and newsReview of news on the market of cars becomes more incredible every month.
Here is a short description of greatest series production cars of last time.
The first member of rate is Astrum Meera is a new concept proposal conceived.
Design of car possesses several features that tap into the role of safety, sustainability and practicality. The exhaust of the car has built-in sensors whose purpose is to track the level of CO2 emissions, alerting the driver when they exceed the normal limit. The wheel rims work through magnetic levitation, like train wheels, making the car lighter and faster. The car's side mirrors retract within its body when parked, and they roll out as soon as the engine starts. They each have a build-in camera system, allowing driver to clearly see outside from inside the vehicle with ease.
New concept sport car from German car producer E-Wolf. E-Wolf unveils an EV supercar that’s so sporty. With a top speed of 155 miles per hour and a 0-60 acceleration that clocks in under four seconds, it has the performance to match its Italian playboy good looks, and its all-wheel drive, where each wheel is powered by an independent electric motor, should be able to keep all 2,000 pounds of it on the road. The Ford F650 is a super truck, appeared in 2000. The F650 is designed as a heavy hauler and is often used for towing or as a small dump truck. It is humongous! Its weight is about 160 tons, height is 3.5 meters – like a one-floor house! But then again, with a price tag of $60,000 up to infinity, it’s not like the standard home owner will possess one anyway.
Spyker Cars adopts new 'Swedish' name
Dutch automaker will rename itself Swedish Automobile NV as part of its deal with a Chinese investor
Car Reviews Automotive & Motoring News
Car News Test DrivesBefore you and me see new models of cars or modifications of old one, they pass through the stricked control in laboratories, garages, on streets and platforms. Everything thing is called test drives. There cars are tested on a great number of points – power, safety, control, easiness of driving, protect from damages and other features. Tests can be made not only for the whole car, but for its separate parts also – wheels, air bags, hardness of base, suitiness of wheels to the type of road, protect from temperature and many others. For each, even smallest detail, scientists have couple of test.
In special laboratories techniques create situations and observe how car will show itself. How will these situations will influence passengers and driver.
It helps producers to identify all problems and disadvantages due to correct them before mass production. In case of low quality test drives, innocent people can be harmed.
While cars are tested instead of passengers, soft manikins are used. Numerous appliances are based on them, and at the moment of artificial crash it will memorize the force of hit, speed, possible damage on other characteristics, needed to be clarified.
When parts are tested they may be separated from the car structure or be on their place. These test also show what material is better to be used on this or those detail, how long will it serve and how it should be treated.
Kia Rio B-Spec First Drive
As I came up fast over the crest just before the sharp right-hander, I felt the race car begin to understeer away from me. "No worries," I thought, forgetting what exactly I was driving, "I'll just get on the power and get it straightened out." A tank-slapper later I was facing the other direction on the edge of the grass. I had just spun out on my first lap ever in a race car. A front-drive Kia Rio B-Spec race car, at that.